ANMA / SERVICES

What I can configure

From turnkey Home Assistant to personal analytics and an interface built from your sketch. Explore real examples and choose what your home or business needs.

01 / ANMA

Turnkey Home Assistant

One system for your home, inverter, battery and connected devices — from preparing a mini-PC to convenient everyday control.

What you receive

  • Equipment review, installation or audit of Home Assistant and required components.
  • Connection of agreed devices, sensor validation and initial scenarios.
  • A dashboard, backup setup, walkthrough and operating guidance. Remote service access is provided with your consent.
02 / ANMA

Inverters and local protocols

Bring solar, grid, load and battery readings into one system using the interfaces your equipment supports.

What you receive

  • Compatibility review for Deye and other inverters, meters and BMS by model and firmware.
  • Modbus TCP/RTU, RS485 or RS232 connection according to manufacturer documentation; validation of registers, units and polling intervals.
  • Home Assistant telemetry and agreed Telegram alerts. Control commands are enabled only where supported and tested.
  1. Inverter / meter
  2. Local interface
  3. Home Assistant
  4. Dashboard + Telegram
03 / ANMA

ANMA Dashboard — designed around you

Clear views for phones, tablets and computers: inverter, battery, home, grid, PV and EV together.

What you receive

  • Custom layouts for cards, charts, energy flows and device states.
  • An interface based on your sketch or reference, with your colours, navigation and chosen metrics.
  • Adaptation to an agreed platform with accessible data or API, tested at your target screen sizes.
04 / ANMA

Energy automation: solar, day and night

Coordinate battery charge, consumption and solar surplus through scenarios tailored to your priorities.

What you receive

  • Priorities for the home, battery, water heater and other controllable loads.
  • Day/night modes, SOC thresholds, battery reserves and power limits.
  • Delays to prevent rapid switching, manual overrides and fallback behaviour when data is unavailable; mode-transition testing.
05 / ANMA

Solar-aware EV charging

Charge your vehicle while accounting for solar generation, household demand and the battery reserve.

What you receive

  • Dynamic charging-current control through a supported charging-station interface.
  • Solar-surplus, scheduled and priority charging modes using agreed rules.
  • Load limits, pause/resume conditions, status displays and notifications.

See the implementation on YouTube

An example of my work: locally controlled EV charging without a cloud API. Readings and commands use a local connection.

Watch on YouTube ↗
06 / ANMA

Forecasts, alerts and interlocks

Use generation forecasts and system conditions to adjust your energy strategy ahead of time.

What you receive

  • Solcast or an agreed forecast source with expected-generation displays.
  • Reserve-charge scenarios when the forecast worsens and nonessential-load interlocks at agreed thresholds.
  • Telegram alerts for faults, connection loss and mode changes, plus event logging and fallback when forecasts are unavailable.
07 / ANMA

Price arbitrage and day-ahead markets

Combine hourly prices, PV forecasts and battery reserves to plan consumption, charging and discharging.

What you receive

  • Connection to an available day-ahead price source, accounting for agreed tariffs, fees and time zone.
  • Selection of favourable time windows within SOC, power and reserve limits; export only where your agreement allows it.
  • A schedule dashboard, decision history and fallback if prices or forecasts fail to update. See the linked video for an example of the approach.

See the implementation on YouTube

A day-ahead market example: planning charging, discharging and consumption around hourly electricity prices.

Watch on YouTube ↗

Day-ahead price arbitrage and its portal are included only in Full Automation. The price source, equipment compatibility and portal scope are agreed before work starts.

Choose package · Full Automation
08 / ANMA

Custom integrations

Connect a device to your system when it provides documented registers, an API or a usable local interface.

What you receive

  • Review of documentation, connectivity and available data before estimating development.
  • Sensors, unit conversion, error handling, reconnection and agreed control commands.
  • Testing on real equipment and configuration guidance for ongoing use.
09 / ANMA

A 3D dashboard of your home

A visual 3D scene of your property linked to readings and states from your actual system.

What you receive

  • A scene based on floor plans and photos, including agreed rooms, zones, equipment and energy flows.
  • Device, lighting and sensor states; day/night appearance, sun and moon elements as part of the agreed design.
  • Connection to existing Home Assistant data, display adaptation and performance checks on the target device.
10 / ANMA

ANMA Analytics — personal hosted analytics

View your inverter analytics on our domain from anywhere with an internet connection.

What you receive

  • Personal access to web analytics for generation, consumption, grid and battery, depending on available data.
  • History and charts over agreed periods, with telemetry delivery from your system to the hosting service.
  • No need to configure TLS certificates or open inbound ports yourself to view analytics. Extra reports, metrics and your own visual style can be commissioned separately.
Explore live analytics ↗
ANMAelectric

Tell me what you have

Send a short description of your system. I will confirm whether remote work is possible and which package matches the scope.

Discuss my system